Comienzo

Dissolved Oxygen Level Sensor for Environmental Monitoring

A Dissolved Oxygen and Temperature Sensor for Wse With HOBO MX800 Series Water Loggers

The dissolved oxygen sensor is an interchangeable sensor that works with HOBO MX800 Series Water Loggers to measure dissolved oxygen and temperature.

The DO sensor can be attached directly to the fully submersible MX801 model, or attached via cable to the direct read MX802 model, which doesn’t require having to pull the sensor out of the water to download data.

When this sensor is connected to a HOBO MX800 logger that also has a conductivity or CTD sensor attached, the logger can record salinity-adjusted DO directly. With this sensor attached to the HOBO MX802 direct read model, the logger can calculate DO percent saturation directly. When used with fully submersible HOBO MX801 model, a barometric logger data file (from either an MX802 or MX2001 logger) is needed to calculate DO percent saturation, for post-processing in the HOBOconnect app. In waters with changing salinity, the logger must also have a salinity sensor attached or you will need an MX800 salinity data file to get DO percent saturation.

Features

User-replaceable DO cap lasts 2 years or more

High accuracy measurements, even without calibration

Get salinity-adjusted DO directly when used with conductivity sensor (W-CT or W-CTD), no need for post-processing

Direct DO percent saturation data, no need for post-processing (when used with MX802)

Easy calibration with included calibration boot – saves time

1” diameter for use in narrow wells (with cable to MX802 above the well)

PVC housing holds up in saltwater

Dissolved Oxygen Sensor Specifications
Sensor Type	Optical Sensor (dynamic luminescence quenching)
Measurement Range	0 to 60 mg/L; 0-600% Saturation
Accuracy	Out-of-box: ±0.2 mg/L (typical) over the range of 0 to 20 mg/L ±4% over the range of 20 to 60 mg/L With user calibration: ±0.1 mg/L over the range of 0 to 20 mg/L; ±2% over the range of 20 to 60 mg/L
Resolution	0.01 mg/L
Sensor Drift	Accuracy is maintained for 2 years; aside from the effects of fouling
Response Time	To 90% in less than 45 sec
DO Sensor Cap Life	2 years; after this the sensor will continue to operate, but possibly with less accuracy

Temperature Sensor Specifications
Temperature Measurement/Operating Range	-5 to 50°C (23 to 104°F), non-freezing
Temperature Accuracy	0.15°C (0.27°F)
Temperature Resolution	0.01°C (0.04°F)
Response Time	To 90% in less than 15 minutes
Logging Rate	When using this sensor, the maximum logging rate is 1 min
Depth Rating	IP-68, waterproof to 100 m (328 ft) - must be attached to logger and have DO sensor cap installed
Wetted Materials	Black Delrin®, PVC, EPDM o-rings, rated for saltwater use
Size	To Be Determined
Markings	CE Compliance Mark
CE Compliance	The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).