Produtos

SkyScan P5-3 Lightning Detector

$ 273.75 USD

• 0-3 miles (0-5 km)
• 3-8 miles (5-13 km)
• 8-20 miles (13-32 km)
• 20-40 miles (32-64 km) ).

• Specifications
• In the box
• Required Items
• Optional Items
• Manuals

• • Dimensions: 64.9" x 3.1" x 1.9"
  • Weight: 500 g
• • SkyScan P5-3 Lightning Detector Equipment
  • Manual in (English)
• • 6 batteries "AA" (Not included)
• • SkyScan P5-3 Wall Mounting Bracket
  • SkyScan 110v AC Adapter
• • Technical Specifications Manual (English)

(ZC20220805)

Ver todos os detalhes do produto »

Slow Violence and the Environmentalism of the Poor

$ 19.95 USD

The violence wrought by climate change, toxic drift, deforestation, oil spills, and the environmental aftermath...

Ver todos os detalhes do produto »

Smith Root SR-7 Barge ²⁵

$ 5,395.00 USD

Simplify Electrofishing in Wide Streams with the Smith-Root SR-7 Tote Barge

Ideal for wadeable but wide streams: portable barge with adjustable electrofishing system, up to 3 anodes, and integrated livewell

The Smith-Root SR-7 Tote Barge is a portable barge designed for electrofishing surveys in water bodies that are too large for backpack units. This mobile solution allows biologists to move easily through shallow streams thanks to its flat-bottom design and minimal draft. It includes a fully adjustable electrofisher, capacity for up to three anodes, and a compartment to keep fish alive during sampling. It is ideal for operations where maneuverability, stability, and efficiency are crucial.

Key Features:

• Durable Design: One-piece polyethylene construction withstands motor vibration and is easy to clean.
• Adjustable Electrofisher: Compatible with Smith-Root systems like the Apex, secured with rubber straps and mounted on shock absorbers.
• Support for 3 Anodes: Allows simultaneous use of up to three anode poles for maximum coverage.
• Integrated Livewell: Safely transports live fish during sampling.
• Standard Bucket Capacity: Includes support for three 5-gallon buckets for specimens or tools.
• Insulated Handlebar with Safety Switch: Automatically shuts off power output when one or both handles are released.
• High Buoyancy: Flat design supports 80 lb per inch of draft, offering excellent stability and load capacity.

• Specifications
• In the Box
• Required Items
• Optional Items
• Documents

• Specification	SR-7 Tote Barge
  Material	Polyethylene
  Length	7 ft (213.4 cm)
  Width (Beam)	36 in (91.4 cm)
  Side Height	14.5 in (36.8 cm)
  Transom Height	16.5 in (41.9 cm)
  Approximate Weight (with Apex and generator)	360 lb (163.3 kg)
  Draft (at 80 lb/in.)	3.5 - 4 in (8.9 - 10.1 cm)
  Maximum Load	300 lb

• • Smith-Root SR-7 Barge
  • Insulated handlebar with safety switch
  • Support for three 5-gallon buckets
  • Shock-mounted tray for generator and Apex system
• • Compatible electrofisher (such as Apex or Smith-Root system)
  • Generator suitable for electrofishing use
  • Anode poles (up to 3)
• • 5-gallon buckets
  • Carrying case or canopy
  • Mountable LED lights or flashlight
• • User Manual

Ver todos os detalhes do produto »

Smith-Root 24V Batteries ²⁵

$ 395.00 USD

Sealed Lead Acid Batteries 24V for Electrofishing – 7Ah and 12Ah Options

Reliable power for your sampling trips with two capacity options: balance weight and performance according to your field needs.

The 24V sealed lead acid batteries are designed to power electrofishing equipment such as the LR-20B, LR-24, and Apex models. Available in two capacities – 7Ah for an ideal balance between weight and duration, and 12Ah for extended sessions – these batteries are sturdy, reliable, and compatible with the UBC-24 charger. Both versions require an additional adapter cable if used with the 12-B Backpack Electrofisher model.

Key Features:

• Capacity options: 7Ah for lighter weight, 12Ah for longer duration.
• Sealed design: Maintenance-free, safe, and durable for field use.
• Direct compatibility: LR-20B, LR-24, and Apex Backpack Electrofisher.
• Adapter required for 12-B: Both batteries need an adapter cable if used with this model.
• Efficient usage: Maintaining a moderate discharge rate extends operating time.
• Compatible with UBC-24 charger: Safe and effective charging for both versions.

• Specifications
• In the Box
• Required Items
• Optional Items

• Specification	24V 7Ah	24V 12Ah
  Voltage	24V	24V
  Capacity	7Ah	12Ah
  Chemistry	Sealed Lead Acid	Sealed Lead Acid
  Weight	10.33 lb (4.7 kg)	18.95 lb (8.6 kg)
  Compatibility	LR-20B, LR-24, Apex Backpack Electrofisher
  Adapter required for	12-B Backpack Electrofisher Model
  Compatible charger	UBC-24

• • x1 Sealed 24V Battery (choice of 7Ah or 12Ah)
• • Adapter cable for use with 12-B Model (not included)
• • UBC-24 Charger

Ver todos os detalhes do produto »

Smith-Root Apex Backpack Electrofisher Equipment - Discontinued

Request Quote

The New Apex of Backpack Electrofishing Apex Electrofishers are transforming fisheries research. You asked us...

Ver todos os detalhes do produto »

Smith-Root Apex Electropesca Control Box

Request Quote

Apex Electrofisher Control Box: Advanced Technology for Fisheries Research

Record, analyze, and standardize your electrofishing sampling with the most comprehensive control unit on the market. Apex transforms scientific electrofishing with precision and efficiency.

The Apex Electrofisher Control Box revolutionizes fisheries research by combining power, automated data logging, and visual tools for real-time analysis. Thanks to its sunlight-readable color display and integrated GPS logging capabilities, researchers can perform electrofishing with confidence, efficiency, and precision. The unit records electrical input and output every second, offering over 20 exportable variables via USB for post-survey analysis.

Key Features:

• Automated Data Logging: Records voltage, current, power, GPS position, temperature, elevation, time, and more every second.
• Color LCD Display: View real-time graphs of peak voltage, peak current, and peak power for quick performance analysis.
• Integrated GPS: Automatically logs geographic location during sampling.
• Wide Output Range: Configurable voltages and frequencies for multiple freshwater environments.
• Alerts and Safety: Includes timer, user alarm, emergency switch, and overload protection.
• Field Assistance: Tutorials, tips, and troubleshooting available directly from the unit.
• USB Software Update: Allows users to easily keep equipment up to date.
• Rugged Design: Built for demanding field conditions with thermal and moisture protection.

• Specifications
• In the Box
• Optional Items

• Specification	Value
  Output Power	7,200W continuous / 24,000W peak
  Output Voltage	0–1,200VDC / 0–240VAC RMS / 339V peak
  Output Frequency	1 to 1,000Hz in 1Hz increments
  Current Range	80A peak (low), 40A (medium), 20A (high), 40A in AC mode
  Duty Cycles	0–100% in 1% increments
  Waveforms	DC, Pulsed DC, Burst of Pulses DC, AC
  Waveform Storage	Up to 12 custom configurations
  Protection	Shuts down on peak or average overcurrent
  Indicators	Audio, flashing red light, dynamic display
  Data Logging	Voltage, current, power, GPS, temperature, elevation, time
  Display	5” color, sunlight-readable
  Data Port	USB 2.0 (download and update)
  Power Input	240VAC, 50/60Hz, max. 30A
  Generator Requirements	8,000W continuous, 240V at 33A
  Environmental Requirements	Altitude: -400 to 3,000 m / Operating Temp: 0–40°C / Humidity: 10–90% non-condensing
  Size	12.5 x 20.5 x 17.5 in (30.48 x 52.07 x 44.45 cm)
  Weight	53 lb. (24.04 kg)

• • Apex Electrofisher Control Unit
• • Carrying backpack
  • Electrode assembly
  • Splatter guard

Ver todos os detalhes do produto »

Smith-Root eDNA Sampler Backpack Combo ²⁵

$ 7,995.00 USD

Next-Gen eDNA Sampling – Smart, Portable & Scientifically Precise

The ultimate portable eDNA sampler—maximizing species detection with one-button control, auto-preserving filters, and GPS accuracy. Engineered for durability, replicability, and effortless field research.

Advanced tool designed for collecting environmental DNA (eDNA) samples in the market. This sampling system is designed to improve sampling efficiency and maximize species detection. It allows for continuous and mobile sampling optimized to obtain spatially integrated eDNA samples, while also being compact and easy to use, with one-button control and an auto-preserving eDNA filter. It uses a computer-controlled pump that makes the sampling more replicable through user-defined sampling parameters and is scientifically backed to ensure the best possible support.

Key Features

• Portable Design: Designed for easy transport and use in the field.
• Accuracy and Efficiency: Continuous and mobile sampling with GPS for precise tracking.
• Ease of Use: One-button control on the handheld model.
• Durability: Resistant materials and a robust design for outdoor conditions.
• Auto-Preserving Filter: Ensures the preservation of eDNA samples.

• Specifications
• In the Box
• Documents

• Specifications
  Minimum Flow	0.1 L/minute
  Maximum Flow	1.4 L/minute
  Maximum Measurable Volume	999.9 L
  Volume Accuracy	> 90% at 0.1 L/minute or higher flow
  GPS System Compatibility	GNSS (GPS, Galileo, GLONASS, BeiDou)
  Number of Channels	72
  GPS, GLONASS Sensitivity	-167 dBm
  GPS Position Accuracy	2.5 meters
  Pump Ports	0.25 inch ID Tubing
  Priming Vacuum	Approx. 5 psi
  Maximum Wet Vacuum	14 psi (96.5 kPa)
  Communication	USB 2.0
  Log File Format	Comma-Separated Values (csv)
  Sampler Battery	11.1Ah 12.8V LiFePO4
  Sampler Battery Life	6 to 8 hours
  Remote Control Battery	1900mAH 1.2V NiMH
  Remote Control Battery Life	Approx. 4 hours
  Sampler Size and Weight	Height: 40.64 cm (16 in.), Width: 38.1 cm (15 in.), Depth: 23.5 cm (9.25 in.), Weight: 7.35 kg (16.2 lb) without battery or remote control
  Remote Control Size and Weight	Height: 11.94 cm (4.7 in.), Width: 6.35 cm (2.5 in.), Depth: 2.39 cm (0.94 in.), Weight: 181.4 g (0.4 lb)
  Remote Control Battery Weight	45.4 g (0.1 lb)

• • x1 Hose Kit
  • x1 Remote Control
  • x1 Battery Charger
  • x1 eDNA Sampler Manual
  • x4 AA Remote Control Batteries w/Charger
  • x1 Lithium Battery or (2) Lead-acid Batteries
• • User Manual

Ver todos os detalhes do produto »

Smith-Root eDNA Self-Preserving Filter Packs Combo

Request Quote

This eDNA filter variety pack is an excellent way to test some of our most...

Ver todos os detalhes do produto »

Smith-Root eDNA Self-Preserving Filter Packs ²⁵

$ 423.75 USD

Simplify Your Environmental DNA Sampling with Self-Preserving eDNA Filters

Reliable filtration with no need for refrigeration. Ideal for field researchers and citizen scientists alike.

Self-Preserving eDNA Filter Packs are an innovative solution for collecting environmental DNA, eliminating the need for refrigeration or preservation buffers. Each pack includes preloaded inline filters with PES membranes and a tube extension, available in 0.45 µm, 1.2 µm, or 5.0 µm pore sizes. Smith-Root’s unique design incorporates a hydrophilic, biodegradable resin that automatically absorbs moisture to preserve captured DNA for over six months at room temperature. Perfect for field sampling, citizen science projects, and biodiversity studies where logistics can be challenging.

Key Features:

• Hassle-Free Self-Preservation: No need for silica bags, buffers, or refrigeration.
• Extended Stability: Preserves eDNA for over 6 months at room temperature.
• Easy to Use: Simply return the filter to its original packaging after sampling.
• High-Quality Membrane: Made of PES for accurate and efficient DNA capture.
• Detachable Design: Filter housing can be easily opened for recovery or further processing.
• Field-Ready: Significantly reduces equipment needed for remote sampling.
• Compatible with Multiple Sampling Systems: Includes tube extension for direct connection.

• Specifications
• In the Box
• Required Items
• Optional Items

• Specification	0.45 µm	1.2 µm	5.0 µm
  Operating Vacuum Pressure	0 to 12 psi (-24.4 inHg)
  Operating Temperature	0 to 40 °C
  Pump Hose Connection	0.25" ID, 0.5" OD silicone tubing
  Membrane Material	PES (others available upon request)
  Pore Size	0.45 µm	1.2 µm	5.0 µm
  Sterilization	Non-sterile (assembled in clean room)
  Suggested Filtration Volume	1 to 10 L
  Storage Temperature	22 °C
  Pre-Filtration Storage	Sealed cardboard box
  Post-Filtration Storage	Original packaging without tubing, in a sealed container at room temperature

• • (25 or 100) Preloaded filter housings (depending on selected pore size)
  • (25 or 100) Tube extensions
• • Compatible eDNA Sampler
  • Manual or motorized pump system
• • eDNA Prefilter Adapter (25-pack)
  • Citizen Scientist eDNA Sample
  • Telescoping or Transect eDNA Sampler Poles

Ver todos os detalhes do produto »

Smith-Root eDNA Standard Filter Packs ²⁵

$ 448.75 USD

Convenient cases of eDNA one-time-use filter packs, containing: (25x or 100x) Preloaded, openable inline filter...

Ver todos os detalhes do produto »

Smith-Root eDNA Telescopic Sampling Pole ²⁵

$ 1,939.00 USD

Reach Inaccessible Areas with the eDNA Telescopic Sampling Pole

Make sampling easier in hard-to-reach locations with the lightweight, ergonomic, field-ready carbon fiber telescopic pole.

The eDNA Telescopic Sampling Pole is specifically designed to facilitate sample collection in hard-to-reach locations using the Smith-Root eDNA Sampler system and self-preserving filters. Made of carbon fiber, this tool extends up to 12 feet (3.6 meters), providing optimal reach for spot sampling in rivers, lakes, or other water bodies. Its design includes an extendable bipod stand that enhances ergonomics during use, allowing precise control of the sample. Thanks to its swivel bearing, the stand allows for quick filter inversion at the end of the filtration cycle. Additionally, the pole folds easily for convenient transport in the field.

Key Features:

• Total Extension Up to 12 Feet: Ideal for reaching distant sites without compromising sampling accuracy.
• Ergonomic Design: The adjustable bipod stand provides comfort and control during sample collection.
• Built-In Swivel Bearing: Enables quick and effortless filter inversion.
• Carbon Fiber Construction: Lightweight, durable, and perfect for extended outdoor use.
• Easy Transport: Folds into a compact size for convenient field portability.
• Full Compatibility: Works with self-preserving filters and the Smith-Root eDNA Sampler system.

• Specifications
• In the Box
• Required Items
• Optional Items

• Specification	Value
  Extended length	11.7 ft (3.57 m)
  Collapsed length	3.6 ft (1.09 m)
  Weight	6.7 lbs (3.04 kg)
  Material	Carbon fiber
  Support	Adjustable bipod with swivel bearing

• • Carbon fiber telescopic pole
  • Support bipod with swivel bearing
  • Clamp for one eDNA filter
• • Smith-Root eDNA Sampler
  • Self-preserving eDNA filter pack
• • Padded carrying case
  • Replacement filters

Ver todos os detalhes do produto »

Smith-Root Electropesca Equipment LR-20B ²⁵

$ 7,095.00 USD

Field Performance and Safety with the Smith-Root LR-20B Electrofisher

Easy to use, powerful, and compatible: the LR-20B offers the best value for your inland water research.

The Smith-Root LR-20B Electrofisher combines simple controls, high power output, and a safety-focused design to deliver a reliable and effective field tool. This portable electrofisher allows easy adjustment of frequency, duty cycle, and waveform type, and provides real-time display of essential parameters through its LCD screen. Its ergonomic frame and quick-release harness ensure comfort and safety, while its multiple safety sensors guarantee reliable operation at all times.

Key Features:

• Intuitive Controls: Quickly adjust frequency, duty cycle, or direct current (DC) and pulse in burst mode.
• Informative LCD Screen: Displays key parameters such as waveform setting, output voltage, current, battery status, and operation time.
• Integrated Safety Systems: Includes immersion, tilt, and open-lid sensors, as well as audio and visual alarms during operation.
• Ergonomic Design: Lightweight, non-conductive packframe with adjustable suspension harness and quick-release mechanism.
• Full Compatibility: Uses the same battery, cathode, and electrode connectors as the Apex and LR-24 models.
• Overload Protection: Internal electronics and a 40A safety fuse to protect the system.

• Specifications
• In the Box
• Required Items

• Specification	LR-20B
  Output Power	400W continuous, 39,600W peak
  Output Voltage	50 to 990V in 11 steps
  Output Frequency	10 to 120Hz in 16 steps
  Duty Cycle	5 to 80% in increments, burst or DC mode
  Overload Protection	Automatic electronic protection and 40A fuse
  Safety Features	Safety sensors, alarms, emergency stop button
  Timer	6-digit digital counter
  Measurements	Voltage, current, power, battery, time
  Battery	24V (lithium or lead-acid)
  Dimensions	Height: 21", Width: 15", Depth: 9"
  Weight	17.8 lb (8.07 kg) without battery or accessories

• • LR-20B control unit
  • Adjustable suspension harness
  • Lightweight non-conductive packframe
• • Compatible 24V battery (lithium or lead-acid)
  • Compatible electrode and cathode for LR-20B

Ver todos os detalhes do produto »

Smith-Root Electropesca Equipment LR-24 ²⁵

Request Quote

Precision Electrofishing with the Smith-Root LR-24: Digital Control, Safety, and Optimal Performance

Designed for fisheries biologists: digital controls, quick setup, and storage for up to 10 custom settings

The LR-24 Backpack Electrofisher from Smith-Root was developed in collaboration with fisheries scientists to provide a lightweight, safe, and efficient solution for fish sampling. With 400 W of continuous power and precise digital controls, this unit enables fast in-field setup, storage of custom settings, and real-time monitoring of electrical output.

Among its many innovations are the quick setup system, dual outputs, overload protection modes, advanced safety features, monitoring of voltage, current, and power, and its ergonomic suspension system. All of this is housed in a rugged design with international safety certifications.

• Precise digital controls for voltage, frequency, and duty cycle
• Automatic quick setup for unknown environments
• Dual output switched from the anode
• Storage for up to 10 custom settings
• Durable construction and adjustable suspension system
• Advanced safety system with immersion, tilt sensors, and emergency shutoff button
• Safety certifications UL STD 61010A-1 and CSA C22.2

• Specifications
• In the Box
• Required Items
• Optional Items
• Documents

• Output Power	400W continuous, 39,600W peak
  Output Voltage	50 to 990V in 5V increments
  Output Frequency	0 to 120Hz in 5Hz increments, burst up to 1000Hz
  Duty Cycle	0% to 99% in 1% increments
  Output Current	40A peak max, 4A continuous at 100V
  Waveforms	Soft DC, Pulsed DC, Burst of Pulses
  Waveform Storage	10 programmable settings
  Overload Protection	Automatic shutdown on excessive current or temperature
  Output Indicators	Audible alarm, flashing red light, status display
  Measurements	Voltage, current, power (average and peak), battery voltage, timer, error status
  Timer	0 to 999,999 seconds, resettable
  Environmental Requirements	Altitude: -400 to 3000 m, Humidity: 10–90%, Operating Temp: 0° to 40°C
  Construction	Rotomolded polyethylene, sealed ABS housing (NEMA 4, IP65)
  Safety Devices	Tilt and immersion sensors, emergency stop button, output indicator, battery fuse
  Battery	24V, lithium or lead-acid
  Battery Life	40 minutes continuous at 100W with 7Ah battery
  Dimensions	Height: 69.9 cm, Width: 36.9 cm, Depth: 36.9 cm
  Weight	9.23 kg (20.35 lb) without battery or accessories
  Certifications	UL STD 61010A-1, CSA C22.2 NO. 1010.1

• • LR-24 Electrofisher
  • Adjustable suspension harness
  • Battery cover
  • User documentation
• • 24V battery (lithium or lead-acid)
  • Compatible charger
  • Compatible electrode and cathode
• • Replacement electrodes
  • Additional batteries
  • Carrying case
• • User Manual

Ver todos os detalhes do produto »

Smith-Root UBC-24 Battery Charger ²⁵

$ 427.00 USD

Safe and Efficient Power with the 24V UBC-24 Battery Charger

Designed to keep your electrofishing gear always ready, the UBC-24 charger provides automatic and reliable charging for 24V batteries used in Apex and LR Series systems.

The UBC-24 Battery Charger is a universal 24-volt battery charger specifically designed to efficiently recharge batteries used in Apex, LR-24, and LR-20 Series backpack electrofishers. This charger features a fully automatic three-stage charging sequence, with a programmed electronic timer and a desulfation mode that helps extend battery life. Its compact design, combined with standard connections and battery output clips, makes it an essential tool for maintaining your field equipment.

Key Features:

• Universal Compatibility: Designed to operate with 90 to 264V AC systems, ideal for multiple regions.
• Automatic Charging Sequence: Three-stage charging with electronic timer and smart desulfation.
• Compact Design: Lightweight and easy to transport, perfect for fieldwork.
• Battery Clip Output: Direct and secure connection to electrofisher batteries.
• Rugged Construction: Durable housing built to withstand harsh outdoor conditions.
• Maintenance Mode: Ideal for preserving battery condition when not in use.

• Specifications
• In the Box
• Required Items
• Optional Items
• Documents

• Specification	UBC-24 Battery Charger
  Input Voltage	Nominal 90 to 264V AC / 47 to 63Hz
  Maximum Output Power	60W
  Timer	2 hours ±30%
  Input Connection	3-pin IEC 320
  Output Connection	Battery clips
  Dimensions	Height: 44 mm, Width: 80 mm, Depth: 135 mm
  Weight	0.77 lb (350 g)

• • UBC-24 Battery Charger
  • Type B ITA Power Cord
• • Compatible 24V batteries (not included)
  • Apex, LR-24, or LR-20 electrofishers
• • International power adapter (if needed)
  • Carrying case
• • User Guide

Ver todos os detalhes do produto »

Smithsonian Trees of North America

Request Quote

An indispensable illustrated source of information for hundreds of species of North American trees. This...

Ver todos os detalhes do produto »

Snake & Reptile Containment Buckets with Red Gamma Screw on Lid ²⁵

$ 51.75 USD

Reptile containment products designed for the safe transport and housing of reptiles like snakes, ensuring...

Ver todos os detalhes do produto »

Snake Bagger Restraining Tubes

$ 49.95 USD

Snake restraining tubes are considered by many herpetologists to be the safest method of working...

Ver todos os detalhes do produto »

Snake Bagger ²⁵

$ 106.90 USD

The Snake Bagger uses two 122 cm long bags for added safety, allowing you to always...

Ver todos os detalhes do produto »

Snakes of the World: A Guide to Every Family

$ 29.95 USD

Snakes are found on every continent except Antarctica and have evolved to occupy a vast...

Ver todos os detalhes do produto »

Social Learning: An Introduction to Mechanisms, Methods, and Models

$ 75.00 USD

Many animals, including humans, acquire valuable skills and knowledge by copying others. Scientists refer to...

Ver todos os detalhes do produto »

Soft Forceps

$ 10.00 USD

Featherweight forceps are widely used by entomologists in a variety of applications. Made of flexible...

Ver todos os detalhes do produto »

Sokkia Topographic Abney Level

$ 207.00 USD

Precision Sokkia Topographic Abney Level Achieve precise measurements with the Sokkia Topographic Abney Level, designed...

Ver todos os detalhes do produto »

Sokkia™ Abney Level with 5x Magnification - Discontinued

$ 247.50 USD – Vendido

Graduated 0 to ±90°, 0 to ±100% on a stationary arc. Vernier reads to 10’....

Ver todos os detalhes do produto »

Solar GPS GSM UHF Recorder NorthStar for Wildlife Tracking from 18 g

Request Quote

Ver todos os detalhes do produto »

Solar Panels for Onset Stations

Request Quote

Ver todos os detalhes do produto »

Solinist 425 Discrete Interval Sampler Reel

Request Quote

Ver todos os detalhes do produto »

Solinst 101 P7 Water Level Meters with 12V Electric Reel ²⁵

$ 6,167.50 USD

The Solinst 101 water level meter with P7 probe is an advanced tool for measuring...

Ver todos os detalhes do produto »

Solinst 102 Water Depth Gauges ²⁵

$ 774.50 USD

Ver todos os detalhes do produto »

Solinst 107 Water Depth, Temperature and Conductivity Meters ²⁵

$ 1,071.90 USD

Accuracy and Reliability with Solinst 107 Meters

Precise Measurement of Water Depth, Temperature, and Conductivity

Ideal for profiling conductivity and temperature in wells and open water, for saltwater intrusion studies, and as a general indicator of contamination levels. The 3/4" (19 mm) diameter probe is attached to the Solinst PVDF flat tape, laser-marked with precision every 1/100 ft or every millimeter. Lengths up to 1000 ft or 300 m, mounted on a Solinst reel.

The conductivity range is 0-80,000 µS/cm. Conductivity and temperature readings are displayed on a rotating LCD screen on the reel face. Conductivity accuracy is 5% of the reading or 100 µS (whichever is greater). A light and buzzer briefly activate when the probe's zero point enters the water. The water depth and depth of the displayed readings are read from the tape. The 9V alkaline battery is housed in an easily accessible battery drawer and provides up to 90 hours of use.

Highlighted Features:

• Ideal for profiling conductivity and temperature.
• Fast response, easy to use.
• Durable design.
• Reliable and built to last.
• Tape lengths up to 1000 ft (300 m).
• Robust Solinst reel and precision laser-marked PVDF tape.
• Probe diameter: 3/4" (19 mm).
• Standard 9V alkaline battery provides 90 hours of use.
• Automatic shut-off after 8 minutes.

• Specifications
• In the Box
• Required Items
• Optional Items
• Manuals

• Parameter	Value
  Conductivity Range	0 to 80,000 µS/cm
  Conductivity Accuracy	±5% of the reading or 100 µS (whichever is greater)
  Temperature Coefficient	2% per °C
  Temperature Range	-15°C to 50°C (23°F to 122°F)
  Temperature Accuracy	±0.2°C or ±0.4°F
  Probe Diameter	19mm (3/4")
  Available Tape Lengths	30m, 60m, 100m, 150m, 250m, 300m (100', 200', 300', 500', 750', 1000')
  Tape Material	PVDF with laser markings every 1 mm or 1/100 ft
  Power Source	Standard 9V battery
  Battery Life	Up to 90 hours of use
  Automatic Shut-off	After 8 minutes of inactivity

• • Solinst Water Depth, Temperature, and Conductivity Meter (1)
  • 9V Batteries (1)
  • Manual (1)
• • None
• • Carrying Case
• Technical Specifications Manual (Spanish)

Ver todos os detalhes do produto »

Solinst 122 Hydrocarbon Interface Meters ²⁵

$ 951.90 USD

Ver todos os detalhes do produto »

Solinst 201 WLT Temperature and Water Depth Gauges ²⁵

$ 928.75 USD

Ver todos os detalhes do produto »

Solinst 3001 L5 Direct Read Cables for Levelogger 5 ²⁵

$ 156.99 USD

Discover the Advantages of Using L5 Direct Read Cables for Solinst Leveloggers Devices, whether suspended...

Ver todos os detalhes do produto »

Solinst 425 Discrete Interval Samplers

Request Quote

Ver todos os detalhes do produto »

Solinst 429 Steel Double Valve Bailers

Request Quote

Ver todos os detalhes do produto »

Solinst Barologger 5 ²⁵

$ 610.90 USD

Ver todos os detalhes do produto »

Solinst Carry Case Model 101 ²⁵

$ 61.00 USD

Solinst Model 101 Transport Case

Protection and Comfort for Your Water Level Meters

The Solinst Model 101 Transport Case is designed to protect and safely transport Solinst water level meters up to 500 feet (150 meters). This durable case ensures that your equipment remains organized and protected during field transport.

Key Features

• Durable Protection: Made with high-durability materials to withstand harsh field conditions.
• Efficient Organization: Internal compartments designed to store cables and accessories in an organized manner.
• Portability: Hands-free design that ensures comfortable and secure equipment transport.
• Adaptability: Compatible with water level meters up to 500 feet (150 meters).

• Specifications
• In the Box
• Required Items
• Optional Items

• Specifications
  Model	Capacity
  106253 (Mini)	Up to 30 m
  102974 (Small)	Up to 100 m
  100109 (Medium)	Up to 150 m

• • x1 Solinst Model 101 Transport Case
• • None
• • None

Ver todos os detalhes do produto »

Solinst Desktop Reader for Levelogger 5 Series ²⁵

$ 198.50 USD

Levelogger 5 Desktop Reader with Optical Reading Options

Optimize the programming of your series 5 dataloggers in the exclusive Connection office.

The most common optical reader for establishing efficient communication with your computer. Additionally, if you have deployed your Levelogger 5 in the field using direct read cables, our kit also offers the option of the Field Reader 5 for a hassle-free connection.

• Specifications
• In the Box
• Documents

• 
  

  Features	Details
  Function	USB adapter for downloading and configuring data loggers
  Compatibility	Compatible with all Levelogger 5 series data loggers
  Download Speed	Up to 57,600 bps
  Power	USB
  Software	Includes desktop software

• • Reader Included
  • Manual
• • User Manual.

Ver todos os detalhes do produto »

Solinst High Pressure Hand Pump

Request Quote

Ver todos os detalhes do produto »

Solinst L5 Direct Read Cables

Request Quote

Ver todos os detalhes do produto »

Solinst Levelogger 5 Application Interface ²⁵

$ 689.50 USD

Uses Bluetooth® wireless technology to communicate with your iOS or Android™ smart device. It uses...

Ver todos os detalhes do produto »

Solinst Readout Unit ²⁵

$ 680.00 USD

Instant Access to Compensated Water Levels and more!

The Solinst Readout Unit (SRU) is an in-field device designed to take and display instant water level readings from a deployed Solinst datalogger.

When connected, you can also select a real-time sampling rate and start a real-time monitoring session independent of the datalogger's internal logging mode. Real-time logs can be saved in the SRU memory.

The SRU has an internal barometer, which provides the option of showing and saving real-time water level readings corrected to ambient air pressure.

The SRU provides access to useful information about the connected datalogger's status, including battery level, memory, serial number, firmware version, and logging mode, as well as the SRU status.

How the Solinst Readout Unit Works

The SRU connects to a Levelogger's Direct Read Cable, a LevelVent Wellhead, or AquaVent Wellhead connector cable.

Using push-buttons, it is easy to power-on and navigate through all SRU menu options. The LCD screen contrast is adjustable to ensure easy viewing in any field condition.

To transfer data files to a PC, the SRU connects using a USB cable. The SRU has upgradable firmware, which allows for future improvements and compatibility with new dataloggers. Note that separate Levelogger PC Software is used to download, view, export, delete data and set up dataloggers.

Outstanding Features

• Convenient and portable
• Clear LCD screen for viewing readings and setting up real-time logging
• Connects to a Levelogger's Direct Read Cable, or LevelVent or AquaVent Wellhead
• Real-time logging and data download does not interrupt running datalogger
• Useful when conducting aquifer tests
• Quick way to check the status of a deployed datalogger
• Uses one replaceable 9V battery
• User-upgradable firmware

• Specifications
• In the Box
• Required Items
• Optional Items
• Documents

• • Características
    Materials:	ABS enclosure, 316 stainless steel connector, silicone rubber cover
    Operating Temperature:	-20ºC to +50ºC
    IP Rating:	IP64 (dust and splash resistant)
    Battery:	Standard 9V replaceable battery
    Battery Life:	Up to 2 years
    Memory:	21 full LTC logs or 19 full LT logs (~1.8 million LTC readings or 2.7 million LT readings)
    Size and Weight:	3.5" x 1.3" x 5.7" 12.4 ounces
    Internal Barometer Accuracy:	± 0.2 kPa
    Compatible With:	5 Series and Edge Series Solinst dataloggers

• • Agrilaser
  • Manual
• • None
• • 9V Battery

EO20232403

Ver todos os detalhes do produto »

Solinst Sonic Water Level Meter Model 104 ²⁵

$ 1,868.50 USD

Characteristics Get a depth to static water level reading within seconds. No need to lower...

Ver todos os detalhes do produto »

Solinst Water Level Meter

Request Quote

Tag Line Model 103: Precision in Depth Measurement is a convenient option for measuring well...

Ver todos os detalhes do produto »

Solinst Water Level Meters Model 101 P2 ²⁵

Request Quote

For measuring the depth to water in wells, boreholes, standpipes, and tanks, Model 101 Water Level Meters are the industry standard for portable hand operated meters. They are sturdy, easy to use and read accurately to 1/100 ft. or each millimeter.

There are two versions to choose from. The Model 101 P7 Water Level Meter features a pressure-proof probe rated to 500 psi and laser marked PVDF flat tape.

The Model 101 P2 Water Level Meter features an easy-to-repair probe and heat embossed polyethylene flat tape.

P2 probes cannot be submersed, while P7 probes are submersible up to 1000′.

• Specifications
• In the Box
• Required Items
• Optional Items

• - Shielded probes avoid false readings
  - All in one design
  - Easy maintenance and repair
  - Durable long-life tape available in Polyethylene or PVDF
  - Precision markings every 1/100th ft or mm
  - Resists corrosion and is easy to repair
  - Tape is strong, flexible, and easily spliced
  
  Polyethylene tape (comes with P2 probe):
  - Heat embossed markings
  - Seven strand stainless steel conductor
  
  PVDF tape (comes with P7 probe):
  - Laser marked
  - 13 strand stainless steel and 6 strand copper coated steel
  - Extremely durable PVDF coating
  - Traceable to NIST standards
• - Water level meter (1)
  - Tape guide/datum (1)
• - None
• - Case

Medidor del Nivel del Agua Solinst Modelo 101

Freatímetro

Ver todos os detalhes do produto »

Solinst Water Level Meters Model 101 P7 ²⁵

$ 632.50 USD

For measuring the depth to water in wells, boreholes, standpipes, and tanks, Model 101 Water Level Meters are the industry standard for portable hand operated meters. They are sturdy, easy to use and read accurately to 1/100 ft. or each millimeter.

There are two versions to choose from. The Model 101 P7 Water Level Meter features a pressure-proof probe rated to 500 psi and laser marked PVDF flat tape.

The Model 101 P2 Water Level Meter features an easy-to-repair probe and heat embossed polyethylene flat tape.

P2 probes cannot be submersed, while P7 probes are submersible up to 1000′.

• Specifications
• In the Box
• Required Items
• Optional Items

• - Shielded probes avoid false readings
  - All in one design
  - Easy maintenance and repair
  - Durable long-life tape available in Polyethylene or PVDF
  - Precision markings every 1/100th ft or mm
  - Resists corrosion and is easy to repair
  - Tape is strong, flexible, and easily spliced
  
  Polyethylene tape (comes with P2 probe):
  - Heat embossed markings
  - Seven strand stainless steel conductor
  
  PVDF tape (comes with P7 probe):
  - Laser marked
  - 13 strand stainless steel and 6 strand copper coated steel
  - Extremely durable PVDF coating
  - Traceable to NIST standards
• - Water level meter (1)
  - Tape guide/datum (1)
• - None
• - Case

Medidor del Nivel del Agua Solinst Modelo 101

Freatímetro

Ver todos os detalhes do produto »

Solinst Well Caps with Padlock Option ²⁵

$ 53.00 USD

The Key to Easy and Secure Deployment of Your Levelogger Devices! The caps are vented...

Ver todos os detalhes do produto »

Song Meter Accessories

$ 179.00 USD

Sold by BIOWEB just in America, excluding US and Canada. To use into US and...

Ver todos os detalhes do produto »

Song Meter Microphone Cable for SMM-U1/A1/A2

$ 99.00 USD

Extension cables designed to connect SM4 and SM4BAT series microphones to Wildlife Acoustics devices. With...

Ver todos os detalhes do produto »