JWH Automatic DC-DC Buck/Boost Power Supply Model 8.INT for 5 to 30 VDC Traps

Automatic DC-DC Buck/Boost Power Supply 8.INT for 6V and 12V Traps

Total versatility: power your traps from any 5 to 30 VDC source and maximize field autonomy.

The Automatic DC-DC Buck/Boost Power Supply – Model 8.INT is designed to allow the use of any 5 to 30 volt power source in our battery-operated traps. It is ideal for projects in remote areas, such as malaria control programs in Africa, where 12V motorcycle batteries and chargers are readily available, avoiding the high cost and logistics of shipping 6V gel batteries.

This converter supports alkaline D-Cell batteries, sealed lead-acid batteries of 6 or 12 volts, and Li-ion batteries, always maintaining the optimal voltage required by the trap. When used with a Model 1012 trap at 12V, power consumption is only 0.16 A/h, allowing a 90 Ah deep-cycle battery to keep the trap running for over 550 hours, equivalent to 45-50 cycles of 12 hours.

Key Features:

• Wide input range: Works with any source between 5 and 30 VDC.
• Extended compatibility: Suitable for 1012, 1212 traps, and other models using 6V or 12V power.
• High energy efficiency: Only 0.16 A/h consumption at 12V on a 1012 trap.
• Exceptional runtime: Over 550 hours of autonomy with a 90 Ah deep-cycle battery.
• Ideal for remote environments: Compatible with 12V motorcycle batteries and common chargers.
• Rugged design: Installed inside the trap housing for full protection.

• Specifications
• In the Box
• Required Items

• Specification	Detail
  Model	8.INT
  Input voltage range	5 to 30 VDC
  Output voltage	6.3 VDC
  Consumption	0.16 A/h (at 12V with 1012 trap)
  Compatibility	Models 1012, 1212, and other 6V/12V traps
  Estimated runtime	+550 hours with 90 Ah deep-cycle battery
  Installation	Internal, protected by the trap housing

• • Automatic DC-DC Buck/Boost Power Supply – Model 8.INT
• • Compatible battery (5-30 VDC) according to availability and intended use