Campbell Scientific CR1000X Measurement and Control Datalogger - Discontinued

Power and Versatility in Data Acquisition

The CR1000X Datalogger from Campbell Scientific offers a robust and precise solution for data collection and management in demanding environments, ensuring reliable performance in meteorological, environmental, and industrial applications.

Required Items! 12 VDC power supply

The CR1000X is a flagship general-purpose datalogger, designed for use in a wide variety of measurement and control applications. The CR1000X is robust enough for use in extreme conditions, with reliability that makes it an excellent choice for remote environmental applications such as weather stations, mesonet systems, wind profiling, air quality monitoring, hydrological systems, water quality monitoring, and hydrometeorological stations.

The CR1000X is a very low-power device that measures sensor signals, controls telecommunications, analyzes data, controls external devices, and stores data and programs in its own non-volatile memory. The electronics are protected against radio frequency interference by a unique sealed stainless steel housing. The internal clock is maintained with a backup battery. It is programmed using the high-level CRBasic language, like all our dataloggers, which allows the implementation of routines for data processing and analysis.

Features

• Operates in extreme conditions, standard range from -40°C to +70°C, and optional extended range from -55°C to +85°C
• Direct connection to a computer USB port
• High-speed sampling of analog signals up to over 300Hz
• High resolution in analog voltage measurements using a 24-bit A/D converter
• Includes two dedicated measurement channels for 0-20 mA or 4-20 mA signals
• CPI port for connecting Campbell Scientific distributed CDM modules
• RJ45 Ethernet port
• MicroSD card slot for memory expansion
• Serial communications with devices and sensors via SDI-12, RS-232, and/or RS-485
• Supports PakBus routing
• Embedded web page

The CR1000X is a low-power electronic device designed to measure sensor signals, manage direct and telecommunications connections, analyze data, control external devices, and with internal non-volatile storage to save data and programs. The electronics are protected from RF interference and failures within a sealed stainless steel cartridge. The clock is safeguarded with an internal backup battery. The CRBasic programming language—common to all Campbell Scientific dataloggers—allows programming for data processing and analysis.

The CR1000X connection panel includes two software-configurable 12 V output terminals, ground terminals distributed across the 16 analog terminals, and removable terminal blocks.

• Specifications
• In the Box
• Required Items
• Optional Items
• Documents

• 
  

  -NOTE-	Additional specifications are listed in the CR1000X Specifications Sheet.
  Operating Temperature Range	-40° to +70°C (standard) -55° to +85°C (extended) Non-condensing environment
  Maximum Scan Rate	1000 Hz
  Case Material	Anodized aluminum
  Analog Inputs	16 single-ended or 8 differential (individually configured). Two analog inputs can measure 4 to 20 mA or 0 to 20 mA natively. Four analog inputs can provide pulse/digital I/O functions.
  Pulse Counters	10 (P1 to P2 and C1 to C8)
  Voltage Excitation Terminals	4 (VX1 to VX4)
  Maximum Source/Sink Current	±40 mA (voltage excitation) 50 mA (switched regulated)
  Communications Ports	Ethernet USB Micro B CS I/O RS-232 RS-422 CPI RS-485
  Data Storage Ports	microSD
  Switched 12 Volt	2 terminals
  Digital I/O	8 terminals (C1 to C8) configurable for digital input and output. Includes status high/low, pulse width modulation, external interrupt, edge timing, switch closure pulse counting, high-frequency pulse counting, UART, RS-232, RS-485, SDM, SDI-12, I2C, and SPI function. Terminals are configurable in pairs for 5 V or 3.3 V logic for some functions.
  Input Limits	±5 V
  Analog Voltage Accuracy	Accuracy specifications do not include sensor or measurement noise. ±(0.04% of measurement + offset) at 0° to 40°C ±(0.06% of measurement + offset) at -40° to +70°C ±(0.08% of measurement + offset) at -55° to +85°C (extended temperature range)
  ADC	24-bit
  Power Requirements	10 to 18 Vdc input (See manual for further details.)
  Real-Time Clock Accuracy	±3 min. per year (Optional GPS correction to ±10 µs)
  Internet Protocols	Ethernet, PPP, RNDIS, ICMP/Ping, Auto-IP (APIPA), IPv4, IPv6, UDP, TCP, TLS (v1.2), DNS, DHCP, SLAAC, Telnet, HTTP(S), SFTP, FTP(S), POP3/TLS, NTP, SMTP/TLS, SNMPv3, CS I/O IP, MQTT
  Communications Protocols	CPI, PakBus, SDM, SDI-12, Modbus, TCP, DNP3, UDP, NTCIP, NMEA 0183, I2C, SPI, and others
  Battery-backed SRAM for CPU Usage & Final Storage	4 MB
  Data Storage	4 MB SRAM + 72 MB flash (Storage expansion of up to 16 GB with removable microSD flash memory card.)
  Idle Current Drain, Average	< 1 mA (@ 12 Vdc)
  Active Current Drain, Average	1 mA (1 Hz scan @ 12 Vdc) 55 mA (20 Hz scan @ 12 Vdc)
  Dimensions	23.8 x 10.1 x 6.2 cm (9.4 x 4.0 x 2.4 in.) Additional clearance required for cables and leads.
  Weight	0.86 kg (1.9 lb)

  
  
• • 1x CR1000X Main Unit: Includes the measurement and control module along with the wiring panel.
  • 3x Detachable Terminal Blocks: Facilitate quick connection of sensors and power cables.
  • 1x Digital Calibration Certificate: Available online at no additional cost for registered customers.
  • 1x Technical Documentation: Product manual and quick start guide in digital format.
• • 12 VDC Power Supply: The CR1000X requires an external 12 VDC power supply. Campbell Scientific offers several options, such as the BPALK, PS150, and PS200 power supplies.
  • Configuration and Programming Software: To program, configure, and communicate with the CR1000X, Campbell Scientific software is required. Options include Short Cut and PC200W, among others.
  • Compatible Sensors: The CR1000X is compatible with a wide range of sensors, including analog (voltage and current), thermocouples, RS232/RS485 serial, SDI-12, pulse, and frequency.
• • Measurement and Control Peripheral Modules:
    • CDM Modules: For channel expansion and connection of high-speed sensors.
    • Multiplexers: To increase the number of analog or digital inputs.
    • Vibrating Wire Interfaces: For specific vibrating wire sensors.
    • Terminal Input Modules (TIMs): To facilitate sensor connection.
    • Relays: For control of external devices.
  • Communication Devices:
    • Multidrop Modems (RS485): For communication in sensor networks.
    • Telephone Modems (landline or cellular): For remote access.
    • Radios and Satellite Transmitters: Compatible with systems like Argos, GOES, Meteosat, Iridium, and Inmarsat.
  • Display Devices:
    • CR1000KD Keyboard/Display: For local visualization and configuration.
    • CD100 and CD295: Mountable displays for data reading.
    • Mobile Devices with LoggerLink: Application for iOS and Android that allows remote visualization and configuration.
  • Weatherproof Enclosures: To protect the CR1000X and its components in outdoor installations.
  • microSD Cards: For expansion of data storage memory.
  • Calibration Certificate: Included at no additional cost and available in digital format for registered customers.

• Product Brochures

  • CR1000X Measurement and Control Datalogger (English)
  • CR1000X Specifications Sheet (English)

  Manuals

  • CR1000X/CR1000Xe Getting Started Guide (English)
  • CR1000X/CR1000Xe Product Manual (English)

  Technical Documents

  • Measuring a PRT or Thermistor without a Completion Resistor (English)
  • FTP Troubleshooting (English)
  • Data Streaming (English)

  Compliance

  • CR1000X EU Declaration of Conformity (English)
  • CR1000X FCC Supplier Declaration of Conformity and FCC Statement (English)
  • CR1000X UK Declaration of Conformity (English)