SHIPPING QUOTE FOR OVERSIZED ITEMS MUST BE REQUESTED | WhatsApp Global CLICK HERE
$ 10.00 USD
Proper baiting techniques are very important for trapping that target animal. The bait sticks make...
$ 100.12 USD
S3PACK is a pack of three simple traps. It includes one model S50, one S70...
Request Quote
The AGK Animal Gauntlet Gloves are designed with a long elk hide sleeve lined with Kevlar, providing excellent penetration resistance and good dexterity. They are perfect for handling birds and small mammals. Additionally, they feature extra leather on the thumb and index finger for safe handling of raptors. All animal handling gloves are bite resistant, but none should be considered bite proof. Always exercise caution when handling animals, even when wearing gloves.
Material | Elk hide, Kevlar lining |
---|---|
Protection | Penetration resistance, extended arm protection |
Dexterity | High maneuverability, ideal for birds and small mammals |
Reinforcements | Extra leather on the thumb and index finger |
Recommended use | Handling of birds, small mammals, and raptors |
Precaution | Bite resistant gloves, not bite proof |
Origin | USA |
$ 54.95 USD
Model ACC12 is our raccoon specific nose cone that allows you to target and catch...
$ 15.00 USD
Anise / Liquorice aroma pellet bait. Works great for raccoon. Place a handful of pellet...
$ 150.00 USD
ArmOR Hand gloves are made for a tight fit. Please check the sizing chart below...
$ 64.50 USD
You no longer have to waste time cutting shrubs or trees growing. This set of poles made of tempered aluminum is lightweight and easy to transport. The set includes 2 extensions poles and 1 pointed bottom pole, with no exposed rivets, which it allows longer durability and performance. Each part ends with non-skid surface, avoiding the nets loops to slide regardless the support dryness or humidity. These poles are made of tempered aluminum to avoid easy bending due to its use. Its design allows to inter enough the pointed bottom pole into the soil. Each piece has a total length of 47 in, adding 135 in once when assembled, from which it is suggested to inter the base piece 2-4 in, for being able to extend the net between the exposed 130 in according to the researcher’s needs.
The length of each piece allows the poles to fit in almost each type of vehicle, and its light weight allows carrying many poles into the field with little effort. These poles have been designed not only to reduce weight when transporting the equipment, to facilitate the installation of a mistnet, but also due to its low price to motivate the researcher not to cut growing bushes or trees, to obtain a natural pole, avoiding so to its maximum extent its intervention when installing mistnets in the field.
To hang a net, you require two (2) sets. This means, to hang two nets installed in the same group, you require three (3) sets, and if you install them separately, it is required four (4) sets.
You may purchase an additional extension pole to increase the altitude system. BIOWEB recommends one additional part (MNET-10-012), maintaining the balance with additional strings. Also, each part, the pointed bottom pole (MNET-10-011) and the extension pole (MNET-10-012), are sold separately. To carry more than one pole parts, you may want to consider the mistnet poles case.
Juego de Varas para Red de Niebla 3.4 m
Soportes, soporte, vara, Mist net poles, Mist net pole
$ 35.00 USD
Ideal case to load up to 8 sets of poles (24 pieces). Made in waterproof material...
$ 364.70 USD
Model 801 is constructed with a heavy duty aluminum frame and chain link mesh. It...
$ 151.95 USD
The BEAST18 model is made entirely of synthetic materials, offering a unique combination of safety and durability. These all-in-one utility gloves feature a double layer of Kevlar and synthetic polymers, ensuring maximum puncture resistance.
These gloves also provide good compression resistance and are easy to wash, making them an ideal choice for professionals who require hygiene and durability in their equipment.
It is important to remember that all gloves designed for animal handling are bite-resistant, but no glove should be considered completely bite-proof. Caution should always be exercised when handling animals, even when wearing gloves.
These items are sold in accordance with our Sales Restrictions.
Specifications | |
---|---|
Material | Kevlar and synthetic polymers |
Resistance | High resistance to punctures and compression |
Washable | Yes |
Recommended Use | Animal handling, security, and law enforcement |
Request Quote
Our vinyl-coated aviation cables maintain an almost perfect circular shape and offer an integrated wrist strap for a secure grip. Available in 5′ and 7′ lengths, they are ideal for displays, signage, and safety applications.
Specification | Description |
---|---|
Material | Aircraft-grade steel with vinyl coating |
Shape | Almost perfect circle |
Strap | Integrated wrist strap |
Finish | Corrosion-resistant vinyl |
Length | 5 feet (≈1.52 m) |
---|---|
Diameter | 3 mm |
Approximate Weight | 120 g |
Length | 7 feet (≈2.13 m) |
---|---|
Diameter | 3 mm |
Approximate Weight | 150 g |
Request Quote
The QL Series features Quick Capture cables made of vinyl-coated stainless steel, designed for fast and secure attachment. Available in 4′, 5′, and 6′ lengths, they are perfect for displays, signage, or any application that requires a strong and easy-to-handle cable.
Length | 4 feet (≈1.22 m) |
---|---|
Diameter | 3 mm |
Approximate Weight | 100 g |
Length | 5 feet (≈1.52 m) |
---|---|
Diameter | 3 mm |
Approximate Weight | 120 g |
Length | 6 feet (≈1.83 m) |
---|---|
Diameter | 3 mm |
Approximate Weight | 140 g |
$ 63.00 USD
These traps are constructed from 1" x 1" - 14 gauge galvanized wire mesh. Designed...
$ 59.00 USD
Designed to be used primarily with standard 30 or 36 inch long 9x11 Double Door...
$ 7.50 USD
Only a few drops of this liquid attractant are needed to attract woodchucks from a...
$ 29.50 USD
The NC1012 model is the "See Through" rear release door from Neighborhood Cats. Designed to trick the smartest and most elusive cats into traps. The clear acrylic rear door allows cats to see completely through the trap, giving them the confidence to enter, believing they can walk through it. It is recommended to use it in a funnel-shaped natural environment so that the cat approaches from the direction of the trap's open door. The NC1012 is designed to fit the 606NC, 608NC, and 608FN trap models. This accessory measures 9-7/8" wide x 12-1/2" high.
Features:
Specifications | |
---|---|
Dimensions | 9-7/8" (W) = 25.1 cm 12-1/2" (H) = 31.7 cm |
Material | Acrylic |
Weight | 0.5 lb |
Release Method | Rear door |
Recommended Use | Control of feral cat populations |
Request Quote
Ideal for pigeons, birds, and other animals. Their unique offset locking design allows them to...
$ 90.00 USD
Model 206NC is a collapsible trap specifically designed for trapping cats. It folds flat or...
Request Quote
The feral cat drop traps were designed with help from the Neighborhood Cats organization. This feral...
$ 66.46 USD
Model 402 collapsible fish live box sets up in seconds and is the perfect portable...
$ 30.00 USD
These traps are built with 1x1" 14-gauge wire mesh. They feature foldable support bars for greater durability and stability in the mud. They are essential tools for wildlife management in natural and agricultural areas, made from durable materials resistant to the elements. They provide a practical and humane solution for capturing muskrats. Their collapsible design makes transportation and storage easy, ideal for managing populations in aquatic habitats.
These items are sold according to our Sales Restrictions.
Ref | Dimensions (in) | Weight (lb) |
---|---|---|
202CS | 28 x 5 x 5 | 3 |
202CL | 36 x 5 x 5 | 3 |
203CS | 28 x 6 x 6 | 4 |
203CL | 36 x 6 x 6 | 4 |
204CS | 28 x 7 x 7 | 5 |
204CL | 36 x 7 x 7 | 5 |
205C | 36 x 8 x 8 | 6 |
206C | 36 x 9 x 9 | 7 |
207C | 36 x 10 x 10 | 8 |
$ 94.95 USD
This collapsible tong snaps into place quickly and easily in a matter of seconds with...
$ 79.95 USD
Model 502.5 Pigeon Trap is new and improved with input from wildlife specialists. This trap...
$ 69.50 USD
Model 502 is new and improved with input from wildlife specialists. This trap collapses to...
$ 125.00 USD
RVF201 is a collapsible roof vent funnel with two changeable door openings for attaching many...
$ 135.95 USD
The Collarum® is one of the best and most humane canine capture devices on the...
$ 76.95 USD
The Collarum® is one of the best and most humane canine capture devices on the...
$ 4.95 USD
The CG100 is a comfortable grip handle that clicks into the square handles of your Neighborhood Cats traps and cages. Its ergonomic design reduces fatigue, making it much more comfortable and safer to transport animals.
Model | CG100 |
---|---|
Type | Comfort grip handle |
Compatibility | Square handles of traps and cages |
Material | Reinforced plastic with metal core |
Internal dimensions | 15 mm x 25 mm (approx.) |
Weight per unit | 35 g |
Units per package | 2 handles |
$ 249.50 USD
Model CB39DD is a unique beaver trap. It is designed for beavers and otters as...
$ 249.50 USD
Model CB39DD is a unique beaver trap. It is designed for beavers and otters as...
$ 170.00 USD
These traps have two trap doors and are strong, reliable, durable, and requires little maintenance....
$ 235.00 USD
There are no traps more versatile than the Model C911MP, the Multipurpose 9x11x36 Comstock Cage Trap, featuring a built-in 3-way nose cone! With two doors, this unique cage trap captures animals coming from two directions in trail situations. Utilizing a bottom opening in the nose cone, it will also capture animals entering or exiting dens, free-standing, or up against structures. Uniquely, this trap with its 3-way nose cone can accommodate up to two additional traps due to side flaps located in the 3-way nose cone. Furthermore, thanks to these side flaps, the trap can be placed either perpendicular or parallel to buildings, on the left or right. This trap is designed for woodchucks, skunks, raccoons, etc.
*Additionally, this multipurpose trap may even be attached upside down, sideways, or at oblique angles to capture raccoons entering or exiting buildings. All Comstock Series Traps are made to order and manufactured on a first-in, first-out basis. Please allow additional processing time for this item to ship.
Specifications | |
---|---|
Dimensions | 36" L x 9" W x 11" H |
Weight | 18 lbs |
Material | 1/2" x 1" wire mesh |
Door Type | Double door |
Nose Cone | 3-way |
Usage | Capturing raccoons, skunks, woodchucks, and similarly-sized animals |
$ 205.00 USD
Model C12SD-36 measures 36L x 12W x 12H and is constructed with 1"x 1/2" -...
$ 145.50 USD
Model C12TD-36 is 36L x 12W x 12H with 1 x 1/2” - 14 gauge...
$ 35.00 USD
Comstock Series Traps have powerful trap doors. This tool makes setting the trap door easy...
$ 25.00 USD
Roadrunner is made of fresh animal products and holds up well in all conditions with...
$ 125.00 USD
Model 405.5 is a multiple catch trap for crayfish, crab, and shrimp. This trap is...
$ 105.80 USD
Critter gloves have been designed to give you added protection without compromising dexterity when handling...
$ 90.25 USD
Deluxe Animal Control Poles feature nearly twice the pole thickness of our standard line, which...