Eijkelkamp Analysis System to Measure Soil Oxygen Content

With the Soil oxygen content analysis system you carry out a soil gas analysis easily and quickly with the help of a needle probe and an oxygen content meter, without the need for drilling.

• Measure soil contamination without the need for complicated drilling.
• The meter allows you to measure up to 0% O2.
• Immediately shows the living conditions of the roots.

This robust system consists of a short soil probe and an oxygen content meter. The probe is pushed into the soil manually. Once at the right depth the probe is lifted slightly to open it. Subsequently the oxygen content meter is connected to the probe and with the aid of a bellows, soil gas is sucked through the meter and the O2 content is measured, which is an important growth parameter for trees and plants.

The probe has a small dead volume, so that a measurement can be taken accurately within a few minutes. The meter allows measurements up to 0% O2 content.

The oxygen content meter works with an electrochemical cell. This cell has a limited service life (about 1.5 years), but can be easily calibrated with air (21%) and with an oxygen-free gas (natural gas, nitrogen).

Note: Please note that the meter requires regular renewal of the O2 sensor.

• Specifications
• In the Box
• Required Items
• Optional Items
• Documents

• • Specifications
    Cable Length	1 m
    Range	0 - 25% volume
    Calibration	Oxygen
    Detection Method	Electrochemical sensor
    Response Time	Within 6 seconds
    Sampling Method	Hand aspirated
    Batteries	9 Volt transistor type
    Operating Hours	Approx. 30
    Operating Temperature	-12 to +45 °C
    Weight	11 lb

• • Soil probe
  • Oxygen content meter
  • Inclusive filter set
  • Including shoulder strap
  • Manual
• • 9v battery
• • None
• • User Manual (English)

EO20231603