Heron Water Level Meters Dipper-T

$ 852.00 USD

Four Function Water Level Meter

The dipper-T water level meter is designed for well drillers, consultants and hydrogeologists all across the globe. The dipper-T is manufactured for professionals who require the most accurate measurements of water levels, length of well-casing and total well-depth.

The Heron dipper-T is renowned for its premium, polyethylene coated yellow steel tape accuracy in measuring depth to water. Available in your choice of either metric or engineering scale.

The dipper-T water level meter can be conveniently converted to a multi-functional instrument, not only able to measure static and falling head levels, but also to determine the length of casing and well depth. The water level sensing probe can be easily removed at the link connection and substituted with either the Well Casing Indicator Probe or Well Depth Indicator Probe. The FOUR FUNCTION capability of the dipper-T water level meter makes this unit an asset to groundwater professionals and rural property owners during the construction of new wells, maintaining wells or decommissioning abandoned wells.

Static mode is used for measuring the depth of water in wells, boreholes and standpipes. DrawDown mode is used for measuring falling water levels during purging, well development and for low flow sampling.

The Well Casing Indicator Probe (Sold separately) is used to measure the depth of metal casing in wells and boreholes from two inches in diameter and upward. The Well Casing Indicator Probe works using magnetism. While the probe sits within the magnetic field of the steel casing, an auditory and visual signal is active. When the probe leaves the magnetic field the signal stops. Note the condition of the well for accurate readings. Recommended Use: New Construction Only (Old/Imperfect casing may cause false or inaccurate readings when using this probe).

The Well Depth Indicator Probe (or bottom detector; Sold separately) is used to measure the full depth in wells and boreholes. The Well Depth Indicator Probe uses a pressure sensitive plunger to measure the distance to the bottom of the well. When the Well Depth Indicator Probe reaches the bottom of the well, the plunger enters the probe body closing a switch, initiating an audible and visual signal at the top of the well.

It is the User's responsibility to ensure chemical, temperature, radiative, and shock compatibility with their site(s) before, during and after deployments. Not doing so will void any and all warranties.

• Specifications
• In the Box
• Required Items
• Optional Items

• Specifications (English)
• - Water level meter (1)
• - None
• - Case
  - Well Depth Indicator Probe
  - Well Casing Indicator Probe

Medidor del Nivel del Agua Heron

Freatímetro

View full product details »

---

Heron Water Level Meters Water Tape

$ 715.00 USD

Static & drawDown Levels

This economical water level indicator is ideal for measuring the water level of wells, bore holes, and standpipes. It signals when water is reached with accuracies to 1/100" of a foot or 1 mm. We use a high quality polyethylene tape, indeibly heat stamped with markings in engineering scale. The tape is reinforced with Kevlar fibers and flexible enough to wind smoothly onto the nylon reel and hangs straight in the well. No on/off switch is needed since, when contact is made, the water shorts the probe to complete a circuit.

Buy with confidence knowing that your quality water level indicator tape will perform over the long term. It is backed by a three year warranty.

The Tape: Kevlar reinforced polyethylene dog bone section with stainless steel conductors. Lengths up to 100 m are available.

The Probe: A 6 mm (5/8”) diameter, 19 mm (7 ½”) long probe of stainless steel and Teflon. The probe has no holes or recesses which might trap contaminants and is water tight to the full depth of the tape. An optional non-submersible 3/8 inch diameter probe is available upon request. (Note:The 3/8” (10 mm) probe should not be used to sound the well).

The Electronics: The fully encapsulated circuitry is protected against dirt and moisture.

The Reel: A tough nylon or aluminum reel mounted on a sturdy powder coated steel frame. A soft vinyl hand grip, ergonomic reel lock and casing hangar are seamlessly incorporated in the frame.

• Specifications
• In the Box
• Required Items
• Optional Items

• - Reel Weight: 2.4 kg
  - Height: 356 mm (14”)
  - Width: 279 mm (11”)
  - Depth: 241 mm (9.5”)
  - Probe Weight: 154 g
  - Length: 176 mm (6.9”)
  - Diameter: 16 mm (0.625”)
  - Depth Rating: Full Length of Tape
  - Wetted Materials: Stainless Steel, Viton, Delrin and Teflon
  - Power Source: 9 Volt Alkaline
  - Operating Mode: Static Water Level
  - Sensitivity Control: Stainless Steel and Aluminum construction
  - Audio/Visual Indication: Ultra bright Red LED and 80 db buzzer
  - Tape Jacketing: Polyethylene
  - Tape Conductors: 7 strand (4 Stainless Steel and 3 Copper)
• - Water level meter (1)
• - None
• - Case

Medidor del Nivel del Agua Heron

Freatímetro

View full product details »

---